The GVM Pressed reducer for Spiralo ducts is a fitting that fits directly onto a duct on two sides.
The reducer will have more resistance in the ducting than the folded, longer V Reducer. This fitting has a KEN-LOK rubber seal with double lip (Soft-Edge) at the end of each spigot, so it can slide easily into a Spiralo duct.
| Item code | Stock | d1 | d2 | l | lp1 | lp2 | α | Box # | Pallet # | Weight | ||
| GVM012.010K | - | 125 | 100 | 23 | 35 | 35 | 248 | 248 | 0.36 | |||
| GVM016.008K | - | 160 | 80 | 64 | 35 | 35 | 144 | 144 | 0.52 | |||
| GVM016.010K | - | 160 | 100 | 41 | 35 | 35 | 144 | 144 | 0.50 | |||
| GVM016.012K | - | 160 | 125 | 35 | 35 | 35 | 144 | 144 | 0.55 | |||
| GVM018.008K | - | 180 | 80 | 160 | 48 | 31 | 100 | 100 | 0.59 | |||
| GVM018.010K | - | 180 | 100 | 61 | 35 | 35 | 100 | 100 | 0.58 | |||
| GVM018.012K | - | 180 | 125 | 47 | 35 | 35 | 100 | 100 | 0.54 | |||
| GVM018.016K | - | 180 | 160 | 21 | 35 | 35 | 100 | 100 | 0.42 | |||
| GVM020.008K | - | 200 | 80 | 206 | 48 | 31 | 75 | 75 | 0.74 | |||
| GVM020.010K | - | 200 | 100 | 58 | 35 | 35 | 75 | 75 | 0.80 | |||
| GVM020.012K | - | 200 | 125 | 48 | 35 | 35 | 75 | 75 | 0.85 | |||
| GVM020.016K | - | 200 | 160 | 34 | 35 | 35 | 75 | 75 | 0.85 | |||
| GVM020.018K | - | 200 | 180 | 32 | 35 | 35 | 75 | 75 | 0.56 | |||
| GVM025.016K | - | 250 | 160 | 59 | 45 | 35 | 48 | 48 | 1.15 | |||
| GVM025.020K | - | 250 | 200 | 46 | 35 | 35 | 48 | 48 | 1.20 | |||
Lagedijkerweg 15
1742 NB Schagen
Netherlands
+31 224 296041
info@airspiralo.com