The GV Pressed reducer for Spiralo ducts is a fitting that fits directly onto a duct on two sides.
The reducer will have more resistance in the ducting than the folded, longer V Reducer. This fitting has a KEN-LOK rubber seal with double lip (Soft-Edge) at the end of each spigot, so it can slide easily into a Spiralo duct.
| Item code | Stock | d1 | d2 | l | lp1 | lp2 | α | Box # | Pallet # | Weight | ||
| GV012.010K | 125 | 100 | 23 | 35 | 35 | 45 | 63 | 756 | 0.16 | |||
| GV016.008K | 160 | 80 | 51 | 35 | 35 | 45 | 30 | 360 | 0.22 | |||
| GV016.010K | 160 | 100 | 41 | 35 | 35 | 45 | 30 | 360 | 0.23 | |||
| GV016.012K | 160 | 125 | 35 | 35 | 35 | 45 | 75 | 450 | 0.22 | |||
| GV018.010K | 180 | 100 | 47 | 35 | 35 | 45 | 24 | 288 | 0.26 | |||
| GV018.012K | 180 | 125 | 37 | 35 | 35 | 45 | 24 | 288 | 0.26 | |||
| GV018.016K | 180 | 160 | 21 | 35 | 35 | 45 | 24 | 288 | 0.23 | |||
| GV020.010K | 200 | 100 | 58 | 35 | 35 | 45 | 20 | 240 | 0.33 | |||
| GV020.012K | 200 | 125 | 48 | 35 | 35 | 45 | 42 | 252 | 0.32 | |||
| GV020.016K | 200 | 160 | 34 | 35 | 35 | 45 | 24 | 288 | 0.29 | |||
| GV020.018K | 200 | 180 | 32 | 35 | 35 | 45 | 24 | 288 | 0.29 | |||
| GV025.016K | 250 | 160 | 59 | 45 | 35 | 45 | 32 | 128 | 0.50 | |||
| GV025.020K | 250 | 200 | 46 | 35 | 35 | 45 | 32 | 128 | 0.44 | |||
Lagedijkerweg 15
1742 NB Schagen
Netherlands
+31 224 296041
info@airspiralo.com